Philips DC315/37 - Set the Alarm Timer; Activate and Deactivate the Alarm Timer; Select a Preset Radio Station; Other Features

Note
To overwrite a programmed station, store another station in its place. •
Select a preset radio station
1 Press PRESET +/- to select a preset number.
6 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1 Ensure that you have set the clock correctly.
2 Press and hold ALM 1 or ALM 2 for 2 seconds.
»
or and hour digits begin to blink.
3 Press TUNING +/- repeatedly to set the hour.
4 Press ALM 1 or ALM 2 to conrm.
»
or and minute digits begin to blink.
5 Repeat steps 3-4 to set the minute.
6 Repeat steps 3-4 to select whether to ring alarm on weekdays
or at weekend.
7 Repeat steps 3-4 to select an alarm sound source.
8 Repeat steps 3-4 to set the alarm volume.
Activate and deactivate the alarm timer
1 Press ALM 1 or ALM 2 repeatedly to activate or deactivate the
timer.
If the timer is activated, »
or is displayed.