Philips DC315/37 - Stop Alarm Ring; Set the Sleep Timer; Repeat Alarm; View the Alarm Settings

If the timer is deactivated, » or disappears.
Repeat alarm
1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS
CONTROL.
The alarm repeats ringing minutes later. »
Tip
You can press • TUNING+/- to adjust interval to repeat alarm.
Stop alarm ring
1 When the alarm rings, press the corresponding ALM 1 or ALM
2.
The alarm stops but the alarm settings remain. »
View the alarm settings
1 Press ALM 1 or ALM 2.
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1 Press SLEEP repeatedly to select a set period of time (in minutes).
When the sleep timer is activated, the display shows »
.
Tip
When sleep mode is activated, output volume decreases gradually. •