Philips DCB293 - Mute Sound; Select a Preset Sound Effect; Enhance Bass; 7 Other Features

18
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB/iPod is activated to play at a
preset time.
Note
Ensure that you have set the clock correctly. 
1 Press to switch to standby mode.
2 Press and hold SLEEP/TIMER for more
than two seconds.
A prompt to select the source is »
displayed.
3 Press CD, iPod, TUNER, DAB, or USB to
select a source.
4 Press SLEEP/TIMERWRFRQÀUP
The clock digits are displayed.»
The hour digits begin to blink.»
5 Press / to set the hour.
6 Press SLEEP/TIMERWRFRQÀUP
The minute digits begin to blink.»
7 Press / to set the minute.
The timer is set and activated.»
»
is displayed.
Mute sound
1
During play, press to mute/unmute
sound.
Select a preset sound effect
1
During play, press DSC repeatedly to
select:
[ POP] (pop)
[ JAZZ] (jazz)
[ ROCK] (rock)
[ CLASSIC] (classic)
[ FLAT@ÁDWDOOHTXDOL]HUVRII
Enhance bass
1
During play, press DBB to turn on or off
dynamic bass enhancement.
If DBB is activated, [DBB] is displayed.»
EN