EasyManua.ls Logo

Philips DECT CD170 - Advanced Settings; Enhance the Audio Quality; Register the Handsets

Philips DECT CD170
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Manual registration
If auto registration fails, register your handset
manually to the base station.
1 Press MENU on the handset.
2 Select [ADVANCED SET] >
[REGISTER], then press OKtoconrm.
3 Press and hold on the base station
for 5 seconds (for the model with
telephone answering machine, you hear a
conrmationbeep).
4 Enter the system PIN. Press BACK to
make corrections.
5 Press OKtoconrmthePIN.
Registration is completed in less than 2 »
minutes. The base automatically assigns
a handset number to the handset.
Note
If the PIN is incorrect or no base is found
within a certain period, your handset displays
anoticationmessage.Repeattheabove
procedure if registration fails.
Note
The preset PIN is 0000. No change can be
made on it.
Unregister the handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2 Press MENU.
3 Select [ADVANCED SET] >
[UNREGISTER], then press OK to
conrm.
4 Enter the system PIN. (The preset PIN
is 0000). Press BACK to remove the
number.
13 Advanced
settings
Enhance the audio quality
XHD(ExtremeHighDenition)soundmodeis
anexclusivefeaturewhichtransmitshighdelity
signals to the handset. It makes the phone
conversations sound like real-life conversations.
When you are in standby mode,
1 Press MENU.
2 Select [ADVANCED SET] > [XHD
SOUND], then press OKtoconrm.
3 Select [ON]/[OFF], then press OK to
conrm.
The setting is saved. »
When you are in a call,
1 Press OK to enter the options menu.
2 Change the XHD setting.
3 Press OKtoconrm.
The setting is saved. »
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
Auto registration
1 Place the unregistered handset on the
base station.
The handset detects the base station »
and start to register automatically.
Registration is completed in less than 2 »
minutes. The base station automatically
assigns a handset number to the
handset.
English
EN
IFU_CD170-175_05_EN.indd 29 2009-12-17 17:30:42

Table of Contents

Related product manuals