English
14
Step 1: Basic Recorder Connections
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using the
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programmes.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see the chapter “Step 2 : Optional
Connections” for the complete
connections to your TV.
A
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA-IN
socket on the
recorder.
B
Use a RF antenna cable to connect
TV-OUT socket on the recorder to
the antenna input socket on your TV
(VHF/UHF RF IN).
Helpful Hint:
– Depending on how you have currently
connected your TV (directly from an off-air
antenna or Cable box or VCR), you will have
to disconnect some of the cables before you
make the above connection.
ANTENNA-IN
TV-OUT
TO TV - I
/
O
EXT1
AUX - I
/
O
EXT2
DIGITAL AUDIO
COAXIAL
COMPONENT
VIDEO
AUDIO-R Pr
AUDIO-L Y Pb
S-VIDEO
CVBS
OUTPUT
S-VIDEO IN
TV
To Next Page
Loading...
