English
18
Step 2: Optional Connections
Connecting to a Cable Box or
Satellite Receiver
Option 1
If your Cable Box/Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
see the section “Step 1: Basic Recorder
Connections – Connecting the antenna
cables” for the complete connections to
your TV.
Option 2 (see the above illustration)
If your Cable Box/Satellite Receiver
has a scart output socket
A
Keep the existing antenna connection
from the Cable Box/Satellite Receiver to
your TV.
B
Use a scart cable (not supplied) to
connect the EXT1 TO TV-I/O scart
socket on the recorder to the
corresponding scart input socket on the
TV.
C
Use another scart cable (not supplied) to
connect the EXT2 AUX-I/O scart
socket on the recorder to the scart
output socket (or labelled as TV OUT or
TO TV) on the Cable Box/Satellite
Receiver.
Helpful Hint:
– When using this connection, automatic
channel search is not required. Read chapter
“Step 3: Installation and Setup”.
ANTENNA-IN
TV-OUT
TO TV - I
/
O
EXT1
AUX - I
/
O
EXT2
DIGITAL AUDIO
COAXIAL
COMPONENT
VIDEO
AUDIO-R Pr
AUDIO-L Y Pb
S-VIDEO
CVBS
MAINS
OUTPUT
TV
RF
S-VIDEO
OUT
IN
AUDIO
R L
VIDEO
TO TV
To Next Page
Loading...
