English
16
Step 1: Basic Recorder Connections (continued)
TO TV - I
/
O
EXT1
DIGITAL AUDIO
COAXIAL
COMPONENT
VIDEO
AUDIO-R Pr
AUDIO-L Y Pb
S-VIDEO
CVBS
OUTPUT
S-VIDEO IN
TV
Option 4
Option 4: Using Component
video socket
If your TV accepts progressive scan
signals, connect the recorder to your TV
using the component video sockets in
order to enjoy the progressive scan
feature.
A
Connect the component video cables
(red/ blue/green - not supplied) from the
Y PB PR sockets on the recorder to the
corresponding component video input
sockets (usually labelled as Y Pb/Cb Pr/Cr
or YUV) on the TV.
B
If your TV accepts Progressive Scan
signal, see the chapter “Setup Menu
Options – Video Settings – { Video
Output }” for Progressive Scan set-up.
IMPORTANT!
The progressive scan video quality is
only available through a Y Pb Pr
connection and a progressive scan
TV is required. It is strongly advised
to complete the recorder
installation rst, before enabling the
progressive scan feature.
dvdr3480-05n31_eng_27232a.indd 16dvdr3480-05n31_eng_27232a.indd 16 2007-11-02 11:51:57 AM2007-11-02 11:51:57 AM
To Next Page
Loading...
