–
19
–
EN
C
Audio Settings
Choose the appropriate Audio Settings for your device. It only affects the Sound during DVD Playback. Follow steps 1 and 2 on
page 16.
3 Select the desired item.
System
Language
Audio
Video
Preference
8
Night Mode
Digital Audio
0
<Audio menu>
4
Digital Audio: (Default: Bitstream)
Set to “Bitstream” when the unit is connected to a Dolby
Digital decoder.
– Bitstream: outputs a Dolby Digital signals.
– PCM: convert the Dolby Digital into PCM (2 channel).
5 To Exit the Menu
m
age
Night Mode
Digital Audio
PCM
Bitstream
Select the Desired
Setting.
Night Mode (Default: 0)
Adjusts for Clarity even when the Volume is Low, by
Compressing the Range of the lowest sound level and the
highest sound level.
m
age
ence
8
Night Mode
Digital Audio
0
Note(s):
Audio Out:
– Bitstream:
Connecting to a Dolby Digital decoder for Dolby Digital Audio output.
– PCM:
Connecting to another device (an MD deck or DAT deck etc.) without a Dolby Digital Decoder.
Convert the Dolby Digital into LPCM (2 channel).
• This unit does not support DTS audio. This is not a malfunction.
You need to set this unit to “Bitstream” in the “Audio Out” Menu and also need to Connect to a TV or Amplifier that
supports DTS, then the audio will be output as DTS.
It is only available when connected via a Coaxial cable.
To Next Page
Loading...
