Philips DVP2702 - Connecting to an Audio System; Analog Audio System Connection; Digital Audio System Connection

–
9
–
EN
Audio
This unit
Analog Audio Connection
AUDIO OUT
Audio cable (included)
Connection to an Audio System
Included cables used in this connection are as follows:
•Audio cable (L/R) × 1
Please purchase the rest of the necessary cables at
your local store.
Digital Audio Connection
Stereo system with Analog Audio Input jacks
Analog Audio
Input jacks
COAXIAL
DIGITAL IN
COAXIAL DIGITAL OUT
Digital Audio Coaxial cable
(not included)
AV receiver / amplifier with a Coaxial input
jack
Coaxial input jack
[SETUP] Æ “Audio”
Æ “Digital Audio” Æ
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
“Bitstream”
Connecting to the other device
(an MD deck etc.)
without Dolby Digital decoder.
“PCM”
Connection
Setting
Note(s):
• The audio source on a disc in a Dolby Digital multi-
channel surround format cannot be recorded as digital
sound by an MD deck.
• By hooking this unit up to a Dolby Digital decoder, you
can enjoy high-quality Dolby Digital multi-channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.