Philips DVP3326 - 4 Get Started; Prepare the Remote Control; Find the Correct Viewing Channel; Select Menu Display Language

12
Select menu display language
The language options may vary from •
different regions.
1 Press SETUP .
» [General Setup] menu is displayed.
2 Select [OSD Language] , then press .
3 Press to select a language, then press
OK .
Turn on progressive scan
Note
To use the progressive scan feature, you must connect •
a progressive scan TV with the component video jacks
(see “Connect” > “Connect video cables” > “Option 1:
Connect to the component video jacks” for details).
Auto Standby
OSD Language
Disc Lock
Sleep Timer
General Setup
English
Video Setup
Picture Setting
TV Display
TV System
Progressive
On
Off
4 Get started
Prepare the remote control
1 Open the battery compartment.
2 Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
Remove batteries if they are exhausted or if the •
remote control is not to be used for a long time.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should
•
be disposed of properly.
Find the correct viewing
channel
1
Press to turn on this product.
2 Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user
manual on how to select the correct
channel.)
EN
(1LQGG6HF(1LQGG6HF 