English
EN 11
Connect
Tip
You can optimise the audio output (see chapter •
‘Adjust settings’ - [ Audio Setup ] > [ Digital Audio
]) for details.
Connect to analogue stereo system
AUDIO IN
1 Connect the audio cables (not supplied) to
the AUDIO OUT L/R sockets on this
DVD player and the audio input sockets
on the device.
Tip
You can optimise the audio output (see chapter •
‘Adjust settings’ - [ Audio Setup ] > [ Analogue
Output ]) for details.
Connect USB device
1 Connect the USB ash drive to the
(USB) socket on this DVD player.
Note
This DVD player can only play/view MP3, WMA, •
DivX or JPEG les that are stored on such devices.
Press
• to access the content and play the les.
Connect to power outlet
Warning
Risk of product damage! Ensure that the power •
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
To Next Page
Loading...
