1-10-2 E8E6DTR
DVD-P-ON+12V is not outputted.
FLOW CHART NO.10
Is approximately +12V voltage supplied to the
emitter of Q1006?
Replace Q1006.
No
No
Ye s
Ye s
Is the "L" pulse (approximately 0V) outputted to
the collector of Q1005?
Check D015, D031, C018 and their periphery,
and service it if defective.
Check Q1005, Q1101 and PWRCON line, and
service it if defective.
FLOW CHART NO.7
P-ON+5V is not outputted. (P-ON+9V is outputted normally.)
Is approximately +5V voltage supplied to the
collector of Q056?
Replace Q056.
No
No
Ye s
Ye s
Is the "H" pulse inputted into the base of Q056?
Check D016, D035, L009, C020, C021, and their
periphery, and service it if defective.
Check R057 and their periphery, and
service it if defective.
FLOW CHART NO.6
P-ON+9V is not outputted.
Is approximately +11V voltage supplied to the
collector of Q055?
Check Q052, D052 and their periphery, and
service it if defective.
No
No
Ye s
Ye s
Is the "L" pulse inputted to the base of Q052?
Check D015, D031, D080, D082, C018, and their
periphery, and service it if defective.
Replace IC501.
FLOW CHART NO.8
TIMER+5V is not outputted. (AL+5V(1) is outputted normally.)
Is approximately +4.5V voltage inputted to the
base of Q063?
No
Ye s
Replace Q063.
Check Q064, D062 and their periphery,
and service it if defective.
FLOW CHART NO.9
AL+18V is not outputted.
Is approximately +20V voltage supplied to the
cathode of D013?
No
Ye s
Check D504, R092, R095, and service it if defective.
Check D013, C013 and their periphery, and
service it if defective.
Is approximately +10V voltage inputted to the base
of Q055?
No
Ye s
Replace Q055.
To Next Page
Loading...
