18
First steps
Table of contents
3
Insert the memory card until it snaps into place.
4
To remove the card press the memory card slightly until the
snapping mechanism unlocks and the card is ejected.
Note
• To ensure that the device stores the recordings on the memory
card, you must switch from the internal memory to microSD
memory card (see also chapter 9.1.1 Set file location, page 38). The
display shows a folder icon which indicates where the recordings
are currently being stored: u, v, w, x, y–internal memory,
à, á, â, ã, ä–memory card.
4.7 Pull out the stand (DVT6000–DVT8000)
Use the stand on the rear side of the device when you stand it on a
table, for example to record a meeting. This way you can get the most
of the microphone on the rear side of the device.
1
Pull out the stand on the back of the unit.
2
Place the unit on a flat surface, such as a table.
To Next Page
Loading...
