21
7. Power Management
If you have VESA DPM compliance display
card or software installed in your PC, the
monitor can automatically reduce its
power consumption when not in use. If
an input from a keyboard, mouse or other
input device is detected, the monitor will
'wake up' automatically. The following
table shows the power consumption and
signaling of this automatic power saving
feature:
Power Management Denition
VESA Mode Video H-sync V-sync Power Used LED Color
Active ON Yes Yes
35.0 W (typ.)
156.1 W(Max.)
White
Sleep
(Standby
mode)
OFF No No 0.5 W
White
(blink)
O mode
OFF - - 0.3 W OFF
The following setup is used to measure
power consumption on this monitor.
• Native resolution: 3440 x 1440
• Contrast: 50%
• Brightness: 80%
• Color temperature: 6500k with full
white pattern
Note
This data is subject to change without
notice.
To Next Page
Loading...
Need help?
General