Managing Patient Information
3-6 EarlyVue VS30 Instructions for Use
Patient Records Tab
The Patient Records tab lists each patient for whom a primary ID has been assigned and
at least one vital signs record has been saved.
When you first open the tab, the list displays one entry for each patient, showing the
patient’s ID information and the date and time the last measurement was taken for that
patient.
You can touch a patient entry to expand it and view all saved records for that patient.
This view is referred to as trend view and can be displayed in tabular or graphical format.
See “Trend View” on page 3-8.
Note
Trend view for the current patient can also be accessed from the main screen by
touching the View Trends button on the patient bar.
To open the Patient Records tab
1 Touch the Records button on the toolbar.
The Records menu opens. Depending on current conditions, the Patient Records tab
may be displayed by default.
2 If the Records menu defaults to the Pending Records tab, touch the Patient Records
tab to open it.
The following table describes the buttons available in the Patient Records tab of the
Records menu, before expanding it to trend view. For information about the available
buttons in trend view, see “Trend View” on page 3-8. .
Button Description
Delete All Deletes all patient records, removing them from the Patient
Records tab and from the patient records database.
Refresh If monitor-to-monitor sharing is enabled, touching the Refresh
button updates the display of data with any newly created patient
records from other monitors in your data-sharing group. This
button is inactive if the Include Shared Data check box is set to
prevent shared data display.
Include Shared Data If monitor-to-monitor sharing is configured on your monitor, use
the Include Shared Data check box as follows:
• Select the check box if you want your monitor to display
patient data from other monitors in the data-sharing group.
• Clear the check box to prevent the display of patient data from
other monitors in the data-sharing group.
Close Closes the Records menu and returns you to the main screen.
To Next Page
Loading...