Philips EasyAir SNS210 MC - Mechanical design-in; Wire strip length; Wire insertion; Wiring Information

10 Design-in Guide - EasyAir SNS210 March 2020
Mechanical design-in
Wiring Information
Applicable wires
Conductor size: solid 0.2 - 0.75 mm
2
Conductor size: fine-stranded 0.2 - 0.75 mm
2
Conductor size: fine-stranded 0.25 - 0.34 mm
2
(with insulated formule)
Conductor size: fine-stranded 0.25 - 0.34 mm
2
(with insulated formule)
AWG 24 - 18
Strip length 7 - 9 mm / 0.28 - 0.35 in
Note: Stranded wires without ferrule should be soldered
Strip length
8.0 ± 0.5 mm
Conductor
[ Conductor: Bare Copper / Strand wire ]
Insulation
5°~7° Angle Max
Insertion
[ Inserting solid conductors via push-in terminal ]
2. Pull-out
1. Push
Wire strip length
Wire insertion
Wire separation from the connector
Inserting solid conductors via push-in terminal