12 Design-in Guide - EasyAir SNS210 March 2020
Mounting in a luminaire
EasyAir SNS210 MC is a luminaire-mount sensor that is
directly powered by a Xitanium SR LED driver. It can be
mounted to a slot or a cut-out in sheet metal.
Note: When daylight sensing is enabled, it is advised to
add a light shield in between LED module and EasyAir
SNS210 in case the sensor is placed close to the LED
module and in the same cavity. Without the shield some
light can tunnel through the white housing and impact
daylight sensing.
LED module
SNS210 Light shield
To Next Page
Loading...
