18 Design-in Guide - EasyAir SNS210 March 2020
Does EasyAir SNS210 MC make sense if I only want to do
occupancy sensing?
Yes. Keep “Occupancy Control” enabled in MC App and
disable “Daylight Control”
How does the daylight harvesting feature work? EasyAir SNS210 MC does inbuilt calibration to 500 lux at
desk level. Auto-calibration to a desired light level will be
enabled in future release.
Is EasyAir SNS210 MC “failsafe”? Unlike traditional occupancy sensors, EasyAir SNS210 MC
does not have a mechanical relay. This is a benefit of
Philips SR LED drivers, as on/off is done relay-free within
the driver. Devices with mechanical relays should be
designed so that relay failure results in “lights on.” If an SR
driver does not see a digital signal from a device for a long
period of time (e.g., loose connection, sensor failure), the
driver goes to full programmed output.
Does EasyAir SNS210 MC work on 0-10v drivers? No. EasyAir SNS210 MC works on Philips Xitanium SR LED
drivers to enable two-way digital communication directly
to the driver and to eliminate the need for other auxiliary
devices.
To Next Page
Loading...
