Philips EasySense - Default Factory Settings

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 9 of 12
EasySense xture-mount sensor
Philips Field Apps: EasySense NFC and EasySense IR
Default Factory Settings
Occupancy Detection Auto-on, Enabled
Daylight-Based Control Auto-on, Enabled
LED Indicator Enabled
Occupancy Mode Auto-on/o
Group Occupancy Sharing Enabled
Group Lighting Behavior Background level
Field Task Tuning 100%
Eco-On Level 100%
Background Light Level 20%
Hold Time 15 minutes
Prolong Time 15 minutes
Grace Fading 10 seconds
Fade to Switch-On 0.7 seconds
Fade to Switch-O 0.7 seconds
EasySense parameters can be congured via
Philips eld apps. Two versions are available:
1. EasySense NFC – This app allows conguring
EasySense parameters only when you
can physically access the sensor with
a smartphone.
2. EasySense IR – This app allows conguring
EasySense paramters plus enables grouping
to a wireless switch, which can be done
with the IR feature of applicable phones
from oor level.
You must rst register for the app to receive a
username and password, then download Philips
eld apps from the Google Play Store. Refer to
www.philips.com/easysense for details, including
applicable Android phones and user manuals.