Problem Cause Solution
You did not install the
AquaClean filter during first
installation, but after having
brewed approx. 25 coffees
(based on 100ml cups). The
machine has to be
completely limescale-free
before you install the
AquaClean filter.
First descale the machine and then
install a new AquaClean filter. After
descaling, the filter counter is reset
to 0/8. Always confirm filter
activation in the machine menu. Also
do this after filter replacement.
The new water filter
does not fit.
You are trying to install
another filter than the
AquaClean filter.
Only the AquaClean filter fits into the
machine.
The machine is making
a noise.
It is normal that your
machine makes noise during
use.
If the machine starts to make a
different kind of noise, clean the
brew group and lubricate it (see
'Lubricating the brew group').
Disposal
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused. For recycling information, please contact your local waste
management facilities or visit www.recycle.philips.com.
Warranty and support
If you need information or support, please visit www.philips.com/support or read the
international warranty leaflet.
30
English
To Next Page
Loading...
