Philips EP4010 Manual

3 Use your TV
Watching Channels from an
External Device
1
Turn On the Set-top Box or the Connected Device.
•
The picture from the Set-top Box or the Connected
Device might appear Automatically on the TV screen.
I
If the picture does not appear
2
Press SOURCE and use  to Select the Set-
top Box or the Connected Device, then press OK.
3
Use the Remote Control for the Set-top Box or the
Connected Device to Select Channels to view.
Displaying Setup using Home Menu
1
Press  to display Home Menu.
Wireless
Screencasting
SetupNet TVSource
Watch TV
Home
Network
2
Use  to Select Setup, then press OK.
Guide to Home Menu screen
Home Menu start screen
Wireless
Screencasting
SetupNet TVSource
Watch TV
Home
Network
  Watch TV
:
Switches back to the TV Source
if another Source is selected.
  Source
:
To Select Connected devices.
  Home Network
:
Accesses Home Network
Menus.
  Net TV
:
Accesses Net TV Menus.
Wireless Screencasting
:
Accesses Wireless
Screencasting Menus.
 Setup
:
Accesses Menus that allow
you to change Picture, Sound
and other TV Settings.
•
Please read the detailed version of this user manual on
www.philips.com/support for more information on menu
features.
Network
Setup Network Connection Settings in order to use Net
TV or Network Upgrade functions.
1
Display Setup using Home Menu and use 
to Select Connect to network, then press OK.
Connect to Network
Before you proceed to Connection test or other settings in
Network section, run the Network settings assistant to
connect the TV to your Network.
Wireless Setting
Select to use a wireless LAN to connect to the Internet by a
wireless connection.
2
Use    to Select Wireless, then press OK.
3
Use    to Select the desired Setting, then press OK, and
follow the On-screen Instructions.
Setting items Description
Easy Connect
Select this Setting if your router has an easy
connect feature. On your router, press the easy
connect button.
If Connection Test fails, refer to the Router’s
Manual for more details.
Scan
Search for Wireless Networks automatically
and select the Wireless Network name (SSID)
from the list.
Manual entry
Set up the connection to the Wireless LAN
Access Point (AP) (e.g. Wireless Router)
manually by entering the Wireless Network
name (SSID).
Wired Setting
Select to use an Ethernet Cable to connect to the Internet by
a Wired Connection. Please purchase Shielded Ethernet
Cables at your local store and use it when you Connect to
Network equipment.
2
Use    to Select Wired, then press OK.
•
Connection test will start automatically. (Refer to Connection
Test

p. .)
Connection Test
Perform the following steps to Test your Internet
connection after you have connected an Ethernet
Cable or entered Network Settings such as IP Address,
DNS Settings, etc. manually.
1
Display Setup using Home Menu and use 
to Select Network settings, then press OK.
2
Use  to Select Connection test, then press OK.
•
Connection Test will start automatically and the Test
result for Home Network and Internet will appear right
after the Connection Test finishes.
•
“Testing…” is displayed while the Connection Test is in
progress.
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
8
Continued on next page.

Philips EP4010 Specifications

General

Brand	Philips
Model	EP4010
Category	TV
Language	English