EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
when the server does not respond.
-Retry Delay After Failed Storage Commit: You can specify the
amount of time in minutes the system should wait before
resending exam content and a commitment request if the
storage commit fails.
Click Save, and then click Save again.
Media Settings
Media settings manage the amount of data that is exported and the
quality of the data.
Setting the Export Compression
You can export to a USB storage device or recordable DVD/CD.
To set the export compression:
Press Support and click the Network/DICOM tab.
Click Media Settings Export Compression.
For Multi-Frame Compression, select one of the following:
- Uncompressed.
- RLE Lossless Compression.
- JPG Lossy Compression.
For MonoChrome, select one of the following:
Monochrome Off.
Send BW as Monochrome, Color as RGB.
Send all as Monochrome.
Enabling Export of Structured Reports
A Structured Report server is a Storage SCP that only supports and
receives reports. To enable this method there must be a Structured
Report server in PSC Network/DICOM DICOM Settings and
then select it as the active Structured Report server in PSC
DICOM format image
compression is either lossy
or lossless JPEG. Multiple
images (e.g. video frames)
can be stored as a single
file. Videos stored in this
way cannot at present be
directly decoded and
viewed, but must first be
converted into one of the
standard digital video
formats.
To Next Page
Loading...