Philips epiq 5 - Page 53

EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
45
Network/DICOM  DICOM Selection.
For Structured Reports to be sent automatically at end exam, the
storage destination must be selected for either the Acquire 1 or
Acquire 2 keys in Setups  Acquisition/Capture  Archive/Print.
To enable export of structured reports:
 Press Support then click the Network/DICOM  Media
Settings.
 Click on Export Structured Report and elect one of the following:
 To a DICOM Storage Server. Click Advanced Settings and
select Enable Structured Reports.
 To a DICOM Structured Report Server (sends the structured
report to a separate storage server from the images).
Enabling Export of Native Data
Native data files are files that contain the maximum amount of
imaging data created with the system application software and have
not been compressed or modified.
To enable export of native data:
 Press Support then click the Network/DICOM  Media
Settings.
 Click Native Data and select any or all of the available types of
native data.
 Click Save.
Enabling Export of 3D Data
To enable export of 3D data:
 Press Support then click the Network/DICOM  Media
Settings.
 Click 3D.
 Click one of the following: