Philips EXP211/00C - Features; Programming Track Numbers; Clearing the Programme

Programming track numbers
You can select up to 50 tracks and store them in the memory in a desired
sequence.You can store any track more than once.
1 Select a track with ∞, §, − or +.
2 Press PROGRAM to store the track.
➜ PROGRAM appears and P with the number
of stored tracks is displayed.
3 Select and store all desired tracks in this way.
4 If necessary press 9 to stop normal playback.
Press 2; to start playback of the programme.
00
To add additional tracks to the programme,
stop playback of the programme by pressing 9
and continue with step 1.
00
To review the programme, keep PROGRAM
pressed for more than 3 seconds.
➜ All stored tracks are displayed in sequence.
Clearing the programme
1 If necessary press 9 to stop playback.
2 Press 9 to clear the programme.
➜ CLr is displayed, PROGRAM disappears and
the programme is cleared.
Notes:
The programme will also be cleared if you interrupt the power supply or open
the CD lid or if the set switches off automatically.
After storing 50 tracks, FULL is displayed.
18
Features
English
S
A
L
B
U
M
•
T
I
T
L
E
MODE
PR
O
G
RA
M
DBB