OR;
Rewinding Coils Method #2:
• Rasp off all solder from top of the module with a file. This will break the coils earth wire points, you will
not be using the wire for earthing by this method again.
• Unsolder coil wire from RF amplifier input & RF amplifier output, plus mixer input and antenna input.
• Move coil ferrites to middle of coil formers.
• Gently remove all coils from block.
• Strip all wire from all coils and, keep the wire previously stripped.
• Clean coil tops & bottoms, plus clean module coil inserts from old glue.
• File down and clean all earth connections on block.
Philips FM92E Conversion to 6 Meters: Version 3.9 Page 40
To Next Page
Loading...
