Philips FM92E - Page 64

31: FM900 12 Digit Hardware codes:
(
A 12-Digit Product Code Is Derived From The Chart Below The First 4 Digits (9502)
Denote Australia And Are Fixed. The Remaining 8 Digits of the code detail the type of
Equipment And Frequency Band (center 3 Digits- Columns 5,6,7), And Optional HardWare
Facilities (last 5 Digits - Columns 8 Thru 12)
1 2 3 4
9 5 0 2
5 6 7 8 9 10 11 12
Series Model Freq/Band Local/Remote Temp/Range Signaling Selcall Option
Spacing Stability Hardware System
--------------------------------------------------------------------------------------
0 10 ppm STD STD STD
Standard (none) No S/Call
--------------------------------------------------------------------------------------
1 5ppm CTSS CCIR Rev/Tone
Xtal/Heater Enc Only Burst
--------------------------------------------------------------------------------------
2 SimPlex E CTSS ZVIE
ENC/DEC
--------------------------------------------------------------------------------------
3 B Local SelCall EEA
Type 1
20/25/30 No CTSS
--------------------------------------------------------------------------------------
4 A Remote CTSS ENC+ EIA Ignition
20/25/30 SelCall T1 Blanker
--------------------------------------------------------------------------------------
5 T 2.5ppm CTSS ENC/DEC I/O Exp
TXCO Kit SelCall T1 No S/Call
--------------------------------------------------------------------------------------
6 U SelCall CCIR T2
Type 2 ENC Only
No CTSS
--------------------------------------------------------------------------------------
7 W1 12.5 Local CTSS ENC ZVEI T2
SelCall T2 ENC Only
---------------------------------------------------------------------------------------
8 W2 12.5 Remote CTSS ENC/DEC EEA T2
SelCall T2 Enc Only
---------------------------------------------------------------------------------------
9 Mobile EIA T2
ENC Only
---------------------------------------------------------------------------------------
Philips FM92E Conversion to 6 Meters: Version 3.9 Page 64