Notes:
– If the total playing time is more than “
99:59
” or if
one of the programmed tracks has a number greater
than 30, then “
--:--
” appears in the display
instead of the total playing time.
– During programming, if no button is pressed within
20 seconds, the system will exit program mode
automatically.
Playing the program
1 Press PLAY É to start program playback.
™ “PLAY PROGRAM” appears on the display.
™ The track number and elapsed playing time of the
current track will appear on the display.
• If you press REPEAT during program playback, the
current track will be played repeatedly.
™ The REPEAT and PROGRAM flags will be displayed.
2 Press STOP Ç to stop program playback.
Note:
– If you press any of the 3 CD DIRECT PLAY buttons, the
system will play the selected disc or track and the
stored program will be ignored temporarily. The
program flag will also temporary disappear from the
display and then reappear, when the playback for the
selected disc ends.
Reviewing the program
Reviewing of the program is only possible in the stop
mode.
• Press PREV í or NEXT ë repeatedly to review
the programmed tracks.
• Press STOP Ç to exit review mode.
Erasing the program
(in the stop mode)
• Press CLEAR on the system.
™ “PROGRAM CLEARED” will be displayed.
Note:
– The program is also erased when the system is
disconnected from the power supply. If the CD
carousel is opened, the tracks belonging to the outer
two trays will be erased and the display will show
“
CLEARED
” .
Shuffle
(only on remote control)
It will play all the available discs and their tracks in
random order. Shuffle can also be used when tracks are
programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ “SHUFFLE” will be displayed.
™ The shuffle flag, the disc and the track selected at
random appear on the display.
• The discs and the tracks will now be played in
random order until you press STOP Ç.
• If you press REPEAT during shuffling, the current
track will be played repeatedly.
™ The REPEAT and SHUFFLE flags will be displayed.
2 Press SHUFFLE again to resume normal playback.
™ The shuffle flag disappears from the display.
Repeat
(only on remote control)
It will play the current track repeatedly.
1 Press REPEAT during CD playback.
™ “REPEAT TRACK” will be displayed.
™ The REPEAT flag and the track selected appear on
the display.
• The track will be played repeatedly until you press
STOP Ç.
2 Press REPEAT again to resume normal playback.
™ The REPEAT flag disappears from the display.
17
English
CD
To Next Page
Loading...
