Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN•CLOSE.
™ The CD compartment slides out.
3 Load a CD with the printed side up in the right tray.
• You can load another disc in the left tray.
• To load the third disc, press the DISC CHANGE
button.
™ The CD changer carousel will rotate until the
empty tray is at the left hand side and is ready for
loading.
™ Playback will always start with the disc in the
outer right disc tray.
4 Press OPEN•CLOSE to close the CD compartment.
™ The total number of tracks and playing time of the
last selected disc appear on the display.
CD Text
It will enable you to know which album and its track you
are selecting or playing on specially encoded CD.
• Press RDS•CD TEXT.
At stop mode
™ The title of album or total playing time will be
displayed.
During Playback
™ The title of album, track title or elapsed time will
be displayed.
• If the album and track title are not known.
™ “NO TEXT ON DISC” will be displayed.
15
English
CD
Warning!
1) This system is designed for conventional CDs. Do not use any accessories like disc stabilizer rings or
CD treatment sheets, etc., which may damage the CD mechanism.
2) Do not load more than one disc into each tray.
3) When the CD changer is loaded with CD(s), do not turn over or shake the system. This may jam the
changer mechanism.
You can load up to three discs in the CD changer for continuous playback without interruption.
To Next Page
Loading...
