Selecting External Equipment
If you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player)
to the AUX IN terminals, you can hear the sound from
the system.
• Press AUX•DVD to select the external mode.
™ “AUX/DVD” will be displayed.
Note:
– All the sound control features (e.g. DSC, DBB, etc.)
are available for selection.
View Clock
You can view the clock (if it is set) at standby or any
source. It will be displayed for about seven seconds.
• Press CLOCK•TIMER briefly.
™ “10:25” (the current time) will be displayed.
™ “--:--” will be displayed if the clock is not set.
Clock Setting
The clock is set in 24-hour mode, e.g. “00:00“ or
“23:59“. Before setting the clock, you must be in the
View Clock mode.
1 Press CLOCK•TIMER to select clock mode.
™ “00:00” or the current time starts flashing.
2 Set the hour with à or á.
3 Set the minute with í or ë.
4 Press CLOCK•TIMER again to store the setting.
™ The clock starts running.
• To exit without storing the setting, press STOP Ç.
Notes:
– During clock setting, if no button is pressed within
90 seconds, the system will exit clock setting mode
automatically.
– When a power interruption occurs, the clock setting is
erased.
– To set the time with RDS clock, see "Receiving RDS
Radio Station" under tuner section.
22
English
AUX•DVD CLOCK
To Next Page
Loading...
