16
English
3139 116 19311
TAPE AUX
Tape Playback
1 Press TAPE to select TAPE mode.
™ "TAPE" will be displayed.
2 Load the tape into the selected tape
deck.
3 Press PLAYÉ to start playback.
• To interrupt playback, press PAUSE.
• To resume playback, press PAUSE
again.
4 Press STOP•OPEN to end playback.
Rewind/Fast Forward
When playback is stopped
1 You can rewind or fast forward a tape
by pressing à or á , respectively.
™ The tape will stop automatically at
the end of rewinding or fast
forwarding.
2 Press STOP•OPEN to stop rewinding or
fast forwarding.
Continuous Playback From Tape
Deck 2 to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape deck 1 and 2.
3 Press PLAY 2 on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY 2 on tape deck 1.
™ Playback will begin with tape deck 2
and will continue with tape deck 1
when playback on tape deck 2 ends.
6 Press STOP•OPEN if you want to stop
playback before the end of the tape in
tape deck 1 or tape deck 2.
Notes:
– During rewinding or fast forwarding of a
tape, it is also possible to listen to
another source (e.g. CD, TUNER or AUX).
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may
get jammed or may burst in the
mechanism.
– C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV or speaker).
.
Selecting External Equipment
If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player or CD
Recorder) to the AUX IN terminals, you can
hear the enhanced sound from the system.
• Press AUX to select the external
equipment.
™ "AUX" will be displayed.
Note:
– All the sound control features (e.g. DSC,
DBB, etc.) are available for selection.
To Next Page
Loading...
