Philips FW-C100 - Clock;Timer; View Clock; Clock Setting; Timer Setting

23
English
3139 115 20281
Clock/Timer
DIGITAL SOUND CONTROL
STANDBY
-
ON
PROGRAM CLOCK • TIMER
MASTER
VOLUME
MINI HIFI SYSTEM
CD1 • 2 • 3
TAPE 1 • 2
TAPECD TUNER
AUX
PRESET
▲
▲
TUNING
▲ ▲ ▲ ▲
STOP• CLEAR
SEARCH
PLAY• PAUSE PREV NEXT
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
•
VIDEO
O
P
T
I
M
A
L
J
A
Z
Z
R
O
C
K
T
E
C
H
N
O
DSC
DYNAMIC BASS BOOST
BAND
DEMO STOP
2
21
3
TUNERTAPE 1/2CD
SLEEP AUXDIM
DSC DBB
MUTE
REPEAT
PAUSE
SHUFFLE
Å
CD DIRECT
VOLUME
á
à
ë
í
É
Ç
View Clock
You can view the clock (if it is set) if the system
is in Standby mode or when any sound source is
selected (CD, TUNER, etc.). The clock will be
displayed for about seven seconds.
¶ Press CLOCK•TIMER briefly (on the system
only).
➜ “10:38 PM or 22:38” (the current time)
will be displayed depending on whether you
have selected 12- or 24-hour mode.
➜ “--:--” will be displayed if the clock is not
set.
Clock Setting
The clock can be set in either 12- or 24-hour
mode, e.g. “12:00 AM“ or “00:00“. Before
setting the clock, you must be in the View Clock
mode.
1 Press CLOCK•TIMER to select clock mode.
2 Press PROGRAM to select 12- and 24- hour
mode.
➜ If 12-hour mode is selected, “12:00“ starts
flashing and the AM lights up.
➜ If 24-hour mode is selected, “00:00” starts
flashing.
3 Set the hour with à or á on the system.
4 Set the minute with í or ëon the system.
5 Press CLOCK•TIMER again to store the
setting.
➜ The clock starts.
¶ To exit without storing the setting, press Çon
the system.
Notes:
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– When a power interruption occurs, the clock
setting is erased.
Timer Setting
¶ The system can switch on to CD or TUNER
mode automatically at a preset time. It can serve
as an alarm to wake you up.
¶ Before setting the timer, make sure the clock is
set correctly.
¶ The timer will always be switched on once it is
set.
¶ The volume of the timer will increase
from the minimum level to the most
recently selected volume level.
1 Press and hold CLOCK•TIMER for more than
2 seconds to select timer mode.
➜ “TU__XX:XX” or “CD__XX:XX" starts
flashing. "XX:XX" is “12:00 AM“ or “00:00” or
the last timer setting, depending on whether 12-
or 24-hour mode has been selected.
➜ The TIMER starts flashing.
2 Press CD or TUNER to select the desired
source.
➜ “TU__XX:XX” indicates the Tuner mode is
selected.
➜ “CD__XX:XX" indicated the CD mode is
selected.
¶ Before selecting CD, make sure a disc is loaded
in the CD changer tray.
pg 01-27/C100/22-Eng 12/6/00, 3:18 PM23