Selecting External Equipment
If you have connected the audio out terminals of
the external equipment (TV, VCR, Laser Disc
player, DVD player or CD Recorder) to the
AUX IN terminals, you can hear the enhanced
sound from the system.
¶ Press AUX to select the external equipment.
➜ "AUX" will be displayed.
Note:
– All the sound control features (e.g. DSC, DBB,
etc.) are available for selection.
Karaoke
Microphone Mixing
(not available for
version /30)
1
Set the MIC LEVEL control to the minimum
level to prevent acoustic feedback (e.g. a loud
howling sound) before you connect the
microphone.
2
Connect a microphone to the
MICROPHONE socket.
3
Press CD, TUNER, TAPE or AUX.
4
Play the selected source.
5
Adjust the volume level with VOLUME control.
6
Adjust the MIC LEVEL control to the mixing
level that you want.
7
Start singing or talking through the microphone.
Note:
–Keep the mic away from the speakers to
prevent howling
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
–For recording, use only tape of IEC type I
(normal tape).
– The tape is secured at both ends with leader
tape. At the beginning and end of tape, nothing will
be recorded for six to seven seconds.
– The recording level is set automatically,
regardless of the position of Volume, DBB or DSC.
–To prevent accidental recording, break out the
tab on the left shoulder of the tape side you want
to protect.
One Touch Recording
● During microphone mixing, you can record the
mixed sound on a tape in tape deck 2 except
dubbing mode.
● For One Touch Recording, as soon as you press
RECORD, the current source (CD, TUNER or
AUX) will be recorded on tape deck 1.
1
Load a blank tape in tape deck 1.
2
Press RECORD on tape deck 1 to start
recording.
➜ The
REC
starts flashing.
3
Press PAUSE to interrupt recording.
4
Press STOP•OPEN on tape deck 1 to stop
recording.
To Next Page
Loading...
