22
English
Checking the program
1 Stop playback and press í or ë repeatedly.
2 Press Ç to exit.
OR
Press ÉÅ to start playback from the current
programmed track
Playing a disc without clearing the
program
● Press one of the CD 1~5 buttons on the
remote to select a disc for playback.
➜ After the selected disc has been played, the
program mode will resume.
Clearing the program
● Stop playback, then press Ç to clear the
program.
OR
Press the OPEN•CLOSE 0 button of the
programmed disc tray.
➜ PROG disappears and "PROGRAM CLEARED"
is displayed.
Note:
– The program will be erased if the system is
disconnected from the power supply.
Disc Operations
To Next Page
Loading...
