Philips FW-C577 - Timer Operations; Sleep timer setting; To cancel the sleep timer function; Other Connection

25
English
Timer Operations Other Connection
Listening to an external source
You can listen to the sound of the connected
external device through your system’s speakers.
L
R
AUDIO OUT
LR
AUX
IN
PLAY
VOL
ALBUM
TITLE
USB PC LINK
CD TUNER
AUX/GAME
CD1 CD2 CD3
CD4 CD5
AUX/GAME
AUX
➠
1
3
2
1 Use the red/white audio cables to connect
the system’s AUX IN (R/L) terminals to the
AUDIO OUT terminals on the other
audio/visual device (such as a TV, VCR, Laser
Disc player, DVD player or CD recorder)
➜ If the connecting device has only a a single
audio out terminal, connect it to the AUX IN left
terminal. Alternatively, you can use a “single to
double” cinch cable, but the output sounds still
remain monaural.
2 Press AUX/GAME until “AUX” is displayed.
3 Press PLAY on the connected device to start
playback.
Notes:
– All the sound control features (DSC, VAC for
example) are available for selection.
– Always refer to the owner’s manual of the other
equipment for complete connection and use details.
Sleep timer setting
The sleep timer enables the system to switch to
Eco Power standby mode automatically at a
preset time.
1 Press SLEEP repeatedly until it reaches the
desired preset turn-off time.
➜ The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™
OFF ™ 15 …
➜ SLEEP is shown, except for "OFF" mode.
➜ To view or change the setting, repeat the
above.
2 Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To cancel the sleep timer function
● Press SLEEP repeatedly until "OFF" is
displayed, or press the STANDBY ON B
button.