Preparations
Step 3: Setting the TV set
IMPORTANT!
– Make sure you have completed all the
necessary connections.
1
Press DISC (DISC 1•2•3) on the front panel
(or press DISC on the remote control).
2
Tu rn on the TV set and set to the correct Video-
In channel. You should see the blue Philips DVD
background screen on the TV set.
Yo u may go to channel 1 on your TV set, then
press the channel down button repeatedly until
you see the Video In channel.
Or, you can use the TV remote control to
select different video modes.
Or, set TV to channel 3 or 4 if you are using
an RF modulator.
Selecting the color system that matches
your TV set
This DVD Mini Hi-Fi System is compatible with
both NTSC and PAL. For the playback of a DVD
disc on this DVD Mini Hi-Fi System, the color
systems of the DVD, TV set and DVD Mini Hi-Fi
System should match.
1
In disc mode, stop playback and press SYSTEM
MENU.
2
Select
icon and press 4.
3
Press 1 / 2 / 3 / 4 keys on the remote
control to toggle through the functions and
select your preferred option.
Move to
and press 2.
Move to “TV System” and press 2.
A
UT
O
– Select this if the connected TV set is
compatible with both NTSC and PAL (multi
system). The output format will be consistent
with the video signal of the disc.
NTSC
– Select this if the connected TV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PAL
– Select this if the connected TV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4
Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
P-SCAN
SET TO NTSC
NTSC
PAL
1
2,3
4
Preparations
Step 4: Setting speakers
You can adjust the delay time (center and rear
only) for individual speakers to optimize the
sound effect according to your surroundings and
setup. Speaker settings are only active on
effective in the case of Multi-channel audio
output.
DIGITAL OUTPUT
SOUND
PCM OUTPUT
NIGHT MODE
CENTER DELAY
REAR DELAY
OFF 5MS
TEST TONE
1
2,3
4
1
In disc mode, press SYSTEM MENU.
2
Select
icon and press 4.
3
Press 2 / 3 / 5 / 4 keys on the remote
control to select your preferred option.
Move to
and press 3.
Move to “CENTER/REAR DELAY” and press 3.
4
Press 3 to set CENTER/REAR DELAY values
you want.
Use longer delay time if the surround
speakers are closer to the listener than the front
speakers.
5
Press OK to confirm.
To remove the menu
Press SYSTEM MENU.
Step 5: Setting language
preference
You can select your preferred language settings
so that this DVD Mini Hi-Fi System will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the language
set by default will be used instead. But the menu
language of the DVD Mini Hi-Fi System cannot
be changed once selected.
1
In disc mode, stop playback and press SYSTEM
MENU.
2
Select
icon and press 4.
3
Press 2 / 3 / 5 / 4 keys on the remote
control to select your preferred option.
Move to
and press 3.
Move to one of the following and press 3.
– Audio (disc’s soundtrack)
– Subtitle (disc’s subtitles)
–Menu (on screen menu)
4
Press 5 / 4 to select a language and press OK.
5
Repeat steps 3~4 for other settings.
To remove the menu
Press SYSTEM MENU.
To Next Page
Loading...
