EasyManua.ls Logo

Philips FW- FW-C399 - Preparation for Recording; One Touch Recording; CD Synchronized Start Recording; Dubbing Tapes

Philips FW- FW-C399
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
English
3139 115 21071
Tape Operation / Recording
Preparation for recording
1 Press TAPE to select TAPE 2.
2 Load a recordable tape into tape deck 2 with full
spool to the left.
3 Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
REC starts flashing.
It is not possible to listen to another source,
except tape dubbing.
It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording
1 Press CD, TUNER or AUX to select the
source.
2 Start playback of the selected source.
3 Press RECORD to start recording.
To stop recording
Press Ç on the system.
Note:
One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" is displayed.
CD Synchronized start recording
1 Press CD to select the disc.
Press í or ë to select the desired track to
start recording.
You can program the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2 Press RECORD to start recording.
The disc will start playback automatically.
To select another track during recording
1 Press ÉÅ to interrupt recording.
2 Pressí or ë to select the desired track.
3 Press ÉÅ to resume recording.
To stop recording
Press Ç.
Recording and disc playback will stop
simultaneously.
Dubbing tapes
1 Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
2 Press DUBBING.
Playing and recording will start simultaneously.
"DUB" is displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
Press Ç.
Notes:
Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
To ensure good dubbing, use tapes of the same
length.
You can listen to another source while dubbing.
pg 001-031/C399/37-Eng 11/28/01, 1:34 PM24

Table of Contents

Related product manuals