1. Remove 5 screws A (see Picture 3) to loosen the Control
Board (pos 6).
2. Remove 4 screws B (see Picture 3) to remove the Panel
Ornamental (pos 17).
DISMANTLING INSTRUCTIONS (POWER BOOSTER AMPLIFIER BOX)
Dismantling the Front Assembly
2
2
1. Place the Power Booster Amplifier Box as shown in
Picture 1 and Picture 2 and use a screw driver (minus
type) to force open the Front assembly.
Caution: Do not break the bundle of wires to the front.
Service Position A
Dismantling the Control Board and the Panel Ornamental
Picture 1
Picture 2
Picture 3
To Next Page
Loading...
