11
English
Connections
Connecting TV set
IMPORTANT!
–You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– Component Video connection
provides higher picture quality. These
options must be available on your TV set.
– Connect the system directly to the TV
set.
Using Video In jack (CVBS)
● Use the composite video cable (yellow) to
connect the system’s VIDEO OUT jack to the
video input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV set.
IMPORTANT!
–To set the VIDEO OUT (put) to ‘Cr Cb
Y’, (see Setting video preference).
Using component Video In jack (Cr Cb
Y)
● Use the component video cables (red/blue/
green) to connect the system’s Pr/Cr Pb/Cb Y
jacks to the corresponding Component video
input jacks on the TV set.
pg001-pg032_FWD17_21-Eng 2005.5.25, 2:32 PM11
To Next Page
Loading...
