Philips FWD17/21M - Setting TV System; Setting Video Out

18
English
Preparations
– Setting TV System
Allows you to select the color system matching
the connected TV set.
NTSC
– If the connected TV is NTSC system, select
this mode. It will change the video signal of a PAL
disc and output in NTSC format.
PA L
– If the connected TV is PAL system, select this
mode. It will change the video signal of a NTSC
disc and output in PAL format.
AUTO
– If the connected TV is multi system, select this
mode.The output format will be in accordance
with the video signal of the disc.
– Setting Video Out
– Video out selection enables you to choose
the type of video output suitable for your DVD
system.
S-VIDEO
– Select S-VIDEO if you have connected the
S-VIDEO output to your TV using S-VIDEO jack.
Pr/Cr Pb/Cb Y
– Select Pr/Cr Pb/Cb Y if you have
connected the video output to your TV using Pr/
Cr Pb/Cb Y jack.
To remove the menu
Press SET UP.
To resume playback
Press PLAY•PAUSE 2; on the set or PLAY
2 on the remote.
pg001-pg032_FWD17_21-Eng 2005.5.25, 2:32 PM18