Philips FWM35/21 - Dismantling of the Front Board; Dismantling of the ETF Tape Module; Dismantling of Rear Portion; Repair Hints

Dismantling of the ETF Tape Module
1) Remove 8 screws G as indicated to loosen the ETF Tape
Module.
Dismantling of Rear PortionDismantling of the Front Board
1) Remove 6 screws C and 7 screws D as indicated to loosen the Front
Board.
2)
Remove 4 screws E as indicated to loosen the Front Board.
1) The Knob Volume can be remove pull it out in the direction
as indicated. See picture 1.
Picture 1
Repair Hints
1) Remove 5 screws H and uncatch M1 as indicated to
loosen the Main Board.
2) Remove 3 screws J as indicated to loosen the
Panel Rear.
Remove Main Board
H
J
2-2
2-2