12
English
Controls (main set illustrations on page 3)
)
•
£
(
≤
∞
§
1
⁄
4
!
2
6
≥
™
0
¡
5
#
º
Controls on the system and
remote control
1 STANDBY-ON/ ECO POWER (B)
– switches the system on or to Eco Power
standby/normal standby with clock display.
2 Source selection – to select the following:
DISC (CD 1/2/3 on the remote control)
– to select disc tray 1, 2 or 3.
TUNER
– to select waveband: FM or MW.
TAPE (on the remote control only)
– to select tape deck.
AUX (on the remote control only)
– to select the input for an additional appliance:
AUX.
AUX•TAPE (on the system only)
– to switch between AUX and tape sources.
USB
– to select USB source.
3 iR SENSOR
– infrared sensor for remote control.
4 MASTER VOLUME (VOL +/-)
– to increase or decrease the volume.
5 DBB
– to select the desired bass boost level. (DBB 1,
DBB 2, DBB 3 or DBB OFF).
6 DSC
– Selects different types of preset sound equaliser
settings (OPTIMAL, TECHNO, ROCK or JAZZ).
7 DISC 1/2/3
– to select a disc tray for playback.
8 Display screen
– to view the current status of the system.
9 OPEN•CLOSE
– to open or close the disc tray.
0 PROG
for CD/ MP3-CD/WMA
to programme disc tracks.
for Tuner ..................... to programme preset radio
stations.
! Mode Selection
ALBUM (-/ +) à á
SEARCH•TUNING
for MP3-CD/USB/WMA
to select previous/next
album.
for CD/MP3-CD/USB/WMA
(press and hold) to search
backward/forward.
for Tuner ..................... to tune to a lower or higher
radio frequency.
for Clock .................... to set the hour.
pg001-034_FWM377_12_Eng 2007.2.4, 16:3812
To Next Page
Loading...
