28
English
External Sources
Ripping function
This function enables you to record music to a
connected USB mass storage device from any
other source (i.e., DISC, TUNER, AUX or TAPE)
without interrupting your enjoyment of the
music.
1 Insert a USB mass device with sufficient free
space to the USB DIRECT socket on
the set. (See "Preparations: Connecting a USB
device or memory card").
2 Prepare the source to record from.
DISC - load the disc(s). Select the disc to
record from. Then, select a track where ripping
will start (See "CD/MP3-CD Operations":
"Selecting a desired track/passage" and "Selecting
a desired Album/Title (MP3 disc only)").
TUNER - tune to the desired radio station
(See "Radio Reception": "Tuning to radio stations"
and "Tuning to preset radio stations").
TAPE - load the prerecorded tape into the tape
deck with the full spool to the left. Press the fast
forward tape key (6) to find the starting point
of ripping if necessary. Press PLAY2 to start
playback.
AUX - connect external equipment.
3 Press USB RECORD to start ripping.
➜ "USB REC" will start flashing on the display.
➜ In the DISC mode, "RIPPING ONE" will scroll
once.
● In the DISC mode, to record all tracks starting
from the one you selected, press USB RECORD
again.
➜ "RIPPING ALL" will scroll once. "ALL" and
"USB REC" will start flashing on the display.
4 At any moment, simply press STOP9 to stop
ripping.
Notes:
– This function can also be combined with the
programme function. In this case, selection of
"RIPPING ALL" in DISC mode will record all
programmed tracks from the starting point to the
USB mass storage device.
– It is impossible to rip from "MIC IN".
–Never unplug the USB mass storage device
before pressing STOP9 to stop ripping.
– In the DISC mode, when you stop ripping or the
free space is insufficient, the current track being
ripped will not be recorded to your USB mass
storage device and the playback will stop at the
same time.
– During ripping, it is impossible to select any
other source or track (radio station) or even switch
the set to standby mode.
To delete a track/album from your USB
mass storage device
1 Plug in the USB mass storage device.
2 Select the track to be deleted during playback.
3 Press USB DELETE on the remote control.
➜ "DEL TRK" appears.
4 Press USB DELETE again before "DEL TRK"
disappears to confirm the deletion.
pg001-034_FWM377_12_Eng 2007.2.4, 16:3828
To Next Page
Loading...
