Philips FWM663/55 - Speaker and Subwoofer Connection; Power Connection

43
Connect power
Caution
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage set on the voltage selector on the back
of the unit.
Ensure that the power supply socket used can
•
support at least 10A current loading.
Before connecting the AC power cord, ensure
•
that you have completed all other connections.
Note
The type plate is located on the back of the •
main unit.
1 Connect the AC power cable to:
the main unit.•
the wall socket.•
Connect speakers
Note
For optimal sound, use the supplied speakers •
only.
Connect only speakers with impedance that is
•
the same or higher than the supplied speakers.
Refer to the Specications section of this
manual.
A: Speakers; B: Subwoofer
Connect the speakers
1 Find “SPEAKERS” sockets on the main
unit.
2 Insert the black connector of the right
speaker wire to “R”, and the black
connector of the left speaker wire to “L”.
Connect the subwoofer
3 Insert the blue connector of the
subwoofer wire to “SUB WOOFER”
socket.
AA
B
English
EN