EasyManua.ls Logo

Philips FWM663/55 - Alarm and Sleep Timer Settings; Advanced Features and File Management; External Device Playback

Philips FWM663/55
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Set the sleep timer
This unit can switch to standby automatically
after a set period.
1 When the unit is turned on, press SLEEP
repeatedly to select a set period (in
minutes).
When sleep timer is activated, »
is
displayed.
To deactivate sleep timer
1 Press SLEEP repeatedly until [OFF] (off)
is displayed.
When sleep timer is deactivated, »
disappears on the display.
Listen to an external device
You can listen to an external audio device
through this unit.
For audio players with headphone sockets
1 Press MP3 LINK/AUX repeatedly to
select the MP3 link source.
2 Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external
device.
3 Start to play the device (refer to the
device’s user manual).
For audio players with red/white audio output
sockets
1 Press MP3 LINK/AUX repeatedly to
select the AUX source.
2 Connect the audio cables (white/red
jacks, not supplied) to:
the AUX IN jacks on the back of the
unit.
the AUDIO OUT jacks on an
external device.
3 Start to play the device (refer to the
device’s user manual).
10 Other features
Set the alarm timer
This unit can be used as an alarm clock. A disc,
radio, or USB/SD device is activated to play at a
preset time.
Note
If you have set a record timer and an alarm
timer, only the latest timer is activated.
1 Ensure that you have set the clock
correctly.
2 Press to switch to standby mode.
3 Press and hold TIMER for more than 2
seconds.
A prompt to select the source is »
displayed.
4 Press CD 1/2/3, or TUNER or USB/SD
to select a source.
5 Press TIMER to conrm.
The clock digits are displayed and »
begin to blink.
6 Press ALBUM/PRESET+/- to set the hour.
7 Press / to set the minute.
8 Press TIMER to conrm.
The timer is set and activated. »
To deactivate or reactivate an alarm timer
1 In the standby mode, press TIMER
repeatedly.
If the timer is activated, »
is displayed.
If the timer is deactivated, »
disappears.
Tip
In MP3 link or AUX mode, the alarm timer
cannot be set.
If a disc or USB/SD source is selected but no
audio le can be played, radio is activated
automatically.
EN

Other manuals for Philips FWM663/55

Related product manuals