Philips FWM663/55 - Scheduling Radio Recordings

51
To deactivate or reactivate a record timer
1 In the standby mode, press TIMER
repeatedly.
If the timer is activated, »
is displayed.
If the timer is deactivated, »
disappears.
Schedule radio-to-USB/SD
record
Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.
Note
A recording is activated only in the standby •
mode.
The maximum length of a recording is 12
•
hours.
1 Ensure that you set the clock correctly.
2 Plug a USB/SD device.
3 Tune to a radio station.
4 Press to switch to standby mode.
5 Press and hold TIMER for more than 2
seconds.
A prompt to select the source is »
displayed.
6 Press TUNER repeatedly to select FM or
AM.
7 Press USB RECORD or SD RECORD.
The start timer digits are displayed and »
begin to blink.
8 Press ALBUM/PRESET+/- to set the hour.
9 Press / to set the minute.
10 Press TIMER to conrm.
The end timer digits are displayed and »
begin to blink.
11 Press ALBUM/PRESET+/- to set the hour.
12 Press / to set the minute.
13 Press TIMER to conrm.
»
is displayed.
At the scheduled times, the recording »
begins and ends automatically.
When the recording ends, the unit »
switches to standby mode.
English
EN