50
9 USB/SD record
Audio CD tracks, MP3 les, radio, and audio from
external devices are recorded in .mp3 format, and
WMA les are recorded in .wma format.
The rst time you record to a USB/SD device,
a folder called ‘PHILIPS’ is automatically created
in the USB/SD device. Each time you record to
a USB/SD device, the recorded les are stored
in a subfolder in the ‘PHILIPS’ folder. Files and
subfolders are named numerically in the order
in which they are created.
Record to a USB/SD device
1
Connect a USB/SD device.
2 Prepare the source to record from.
Disc - Select the disc source and load •
a disc. You can select a track from
which a recording starts.
Radio - Tune to a radio station.•
MP3 LINK/AUX - Select the MP3 •
link/AUX source, and then connect
and start to play an external device.
Karaoke - Singing during karaoke. •
3 Press USB RECORD or SD RECORD to
start recording.
For discs, press • USB RECORD or
SD RECORD repeatedly to select:
A [REC ONE] (record one): the rst/
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
Disc play starts automatically from the »
beginning of the disc/the selected track,
and the recording starts.
To stop recording, press•
.
Note
If the USB/SD device does not have enough •
memory to store the audio les, a message
about a full memory is displayed.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
[PROG] (program) blinks on the »
display.
3 Press ALBUM/PRESET+/- to allocate a
number to this radio station, and then
press PROG to conrm.
The preset number and the frequency »
of the preset station are displayed.
4 Repeat the previous steps to program
other stations.
Tip
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1
In tuner mode, press ALBUM/PRESET+/-
to select a preset number.
Tip
Position the antenna as far as possible from •
TV, VCR, or other radiation source.
For optimal reception, fully extend and adjust
•
the position of the antenna.
EN
To Next Page
Loading...
