11EN
Connect the rear speakers
3 Find "REAR SPEAKERS" sockets in gray on
the main unit.
4 Insert the connector of the rear right
speaker wire to "R", and the connector of
the rear left speaker wire to "L".
Connect the subwoofers
5 Find "SUB WOOFER" sockets in blue on
the main unit.
6 Insert the connector of the right
subwoofer to "R", and the connector of the
left subwoofer wire to "L".
Connect speaker LEDs
17 1 $
2 .
(
)0
1 Find a LED socket on the back of the main
unit.
2 Insert the connector of the LED wire to
the LED socket.
3 Follow the steps above to connect the rest
speaker LEDs.
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage set on the voltage
selector on the bottom of the unit.
• Ensure that the power supply socket used can
support at least 10A current loading.
• Before connecting the AC power cord, ensure that you
have completed all other connections.
1 If your power supply voltage is 110V-127V,
adjust the voltage selector (locate on the
bottom of the unit) to 110V-127V.
2 Connect the AC power cable to the wall
socket.
$17(11$
'2&.
/('
)0
/('
0
63 $.(56
6 %
:22)(5
5 $5
63 $.( 6
To Next Page
Loading...
