Philips FWM9000 - Recording to USB; Recording Audio to USB; Scheduling Radio Recordings

20 EN
» is displayed.
» At the scheduled times, the recording
begins and ends automatically.
» When the recording ends, the unit
switches to standby mode.
To deactivate or reactivate a record timer
1 In the standby mode, press TIMER
repeatedly.
» If the timer is activated,
is displayed.
» If the timer is deactivated,
disappears.
11 Other features
Set the alarm timer
This unit can be used as an alarm clock. A disc,
radio, or USB device is activated to play at a
preset time.
Note
•
If you have set a record timer and an alarm timer, only
the latest timer is activated.
1 Ensure that you have set the clock
correctly.
2 Press to switch to standby mode.
3 Press and hold TIMER for more than 2
seconds.
» A prompt to select the source is
displayed.
4 Press CD 1/2/3, or TUNER or USB 1/2 to
select a source.
5 Press TIMER to conrm.
» The clock digits are displayed and
begin to blink.
6 Press ALB/PRESET+/- to set the hour.
7 Press / to set the minute.
8 Press TIMER to conrm.
» The timer is set and activated.
To deactivate or reactivate an alarm timer
1 In the standby mode, press TIMER
repeatedly.
» If the timer is activated,
is displayed.
» If the timer is deactivated,
disappears.
Tip
•
In MP3 link or AUX mode, the alarm timer cannot be
set.
• If a disc or USB source is selected but no audio le can
be played, radio is activated automatically.