Philips FWM9000 - Muting and Boosting Sound; Preset Sound Effects (DSC); Bass Enhancement (DBB); Virtual Surround Sound

18 EN
9 Listen to radio
Tune to a radio station
1
Press TUNER repeatedly to select FM or
AM.
2 Press and hold / for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/
repeatedly until you nd optimal
reception.
Program radio stations
automatically
You can program a maximum of 40 preset
radio stations.
In the tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
» [AUTO] (auto) is displayed.
» The unit automatically stores radio stations
with sufcient signal strength.
» After all available radio stations are stored,
the rst stored radio station is broadcast
automatically.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG] (program) blinks on the
display.
3 Press ALBUM/PRESET+/- to allocate a
number to this radio station, and then
press PROG to conrm.
» The preset number and the frequency
of the preset station are displayed.
4 Repeat the previous steps to program
other stations.
Tip
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press ALBUM/PRESET+/- to
select a preset number.
Tip
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.