Philips FWM997/55 - Connect Power

11
Connect power
Caution
Risk of product damage! Ensure that the power 
supply voltage corresponds to the voltage set on the
voltage selector on the back of the Mini Hi-Fi and the
subwoofer.
Before you connect the AC power cord, ensure that

you have completed all other connections.
A: main unit; B: subwoofer
Note
The type plate is located on the back of the main 
unit.
The type plate is located on the back of the

subwoofer.
1 If your power supply voltage is 110V-
127V, adjust the voltage selector to
110V-127V for the main unit and the
subwoofer.
2 Connect one AC power cable to:
the main unit.
the wall socket.
3 Connect one AC power cable to:
the subwoofer.
the wall socket.
A
B
4 Insert the white-black wires into a pair of
white-black (+/-) sockets, the white wire
into the white (+) socket, the black wire
into the black (-) socket.
5 )RUWKHOHIWIURQWVSHDNHUÀQGWKHVRFNHWV
on the main unit marked “L”.
6 Repeat steps 2-4 to connect the left front
speaker.
Connect the rear speakers
1 )RUWKHULJKWUHDUVSHDNHUÀQGWKH
sockets on the back of the subwoofer
marked “R”.
2 Insert the purple wire into the purple
socket (+) and the black wire into the
black socket (-).
3 )RUWKHOHIWUHDUVSHDNHUÀQGWKHVRFNHWV
on the back of the subwoofer marked “L”.
4 Repeat step 2 to connect the left rear
speaker.
Connect the subwoofer
1 Connect the DIN cable to SUBWOOFER
jack on the main unit and FROM MAIN
jack on the subwoofer.
English
EN